Is there any Kenwood made, or homemade way to cross band repeat the x30 series radios? I know most of what I need is in the accessory port, and I have tons of plugs, and pins. The only problem I can think of is that the COR of one radio is high, and the PTT is low on the other.
I do have a bit of experience with the accessory port as I have a TK-730 set up for APRS with a Tiny Trak 3 plus.
TK-x30 cross band repeat
Moderator: willbartlett
Re: TK-x30 cross band repeat
Nobody? There was never a module made for this??
Re: TK-x30 cross band repeat
I built a dual bander awhile back and have tinkered with a bunch of 830's. Never heard of a cross band repeater. Be a cool project though.
Re: TK-x30 cross band repeat
I'm going to go with a unit that Pyramid Communications makes. SVR-200 is the model number.
-
- Posts: 4
- Joined: Thu Jul 12, 2012 10:34 pm
Re: TK-x30 cross band repeat
Are you still looking to X-band with x30's? I'm running a 790/890 in X-band repeat thru the rear DB25 connectors.
Tim
Tim
Re: TK-x30 cross band repeat
tskilbride wrote:Are you still looking to X-band with x30's? I'm running a 790/890 in X-band repeat thru the rear DB25 connectors.
Tim
Yeah..... How did you do that??