Kenwood TK-630H Power Adjustment
Moderator: willbartlett
-
- Posts: 1
- Joined: Tue May 24, 2016 4:17 pm
Kenwood TK-630H Power Adjustment
From the service manual, you adjust VR1 & VR2 on the Final board. But is there any specific order or method to the adjustments? I want to take down the 110 watts to 60 or so.
-
- Posts: 29
- Joined: Tue Nov 15, 2005 12:37 pm
Re: Kenwood TK-630H Power Adjustment
I don't know the answer to your question.
But if you want 60 watts *or so* why not set the channel to low power which is about 50 watts IIRC?
But if you want 60 watts *or so* why not set the channel to low power which is about 50 watts IIRC?
Re: Kenwood TK-630H Power Adjustment
There is no low power setting on the 30 series in software.
The 90 series does have a high/low.
The 90 series does have a high/low.