Hi all,
So I have searched the forum for clues to why my two radios are not scanning. I have both a TK-730 and TK-830 that I have programmed into the ham bands via SP Tune. I am able to add and delete channels from the scan list, I have it set for YES on off hook scan but still it will not allow me to scan when I press the button, and the button is assigned correctly through the programming menu. I am using KPG-7D version 2.01 as well.
Any tips, I see lots of people have had this issue, but not seeing much in the way of resolutions.
Thank you
Brian
TK-730 and TK-830 not Scanning
Moderator: willbartlett
-
- Posts: 3
- Joined: Tue Aug 07, 2007 11:41 am
Re: TK-730 and TK-830 not Scanning
Brian,
Try grounding the mic hang up clips. Later model Kenwoods provide a ground and a mic hang up signal through the mic cable, but on the X30 series, the clip needs to be grounded.
I hope this helps; let me know if it doesn't and we can dig further into what the problem might be.
JB
Try grounding the mic hang up clips. Later model Kenwoods provide a ground and a mic hang up signal through the mic cable, but on the X30 series, the clip needs to be grounded.
I hope this helps; let me know if it doesn't and we can dig further into what the problem might be.
JB
Re: TK-730 and TK-830 not Scanning
Yeay, thanks JB that worked for me.breenelectric wrote: ↑Tue Mar 14, 2017 11:38 am Brian,
Try grounding the mic hang up clips. Later model Kenwoods provide a ground and a mic hang up signal through the mic cable, but on the X30 series, the clip needs to be grounded.
I hope this helps; let me know if it doesn't and we can dig further into what the problem might be.
JB