FT-7100 need help

Forum dedicated to discussion on Yaesu Amateur Radio products

Moderator: willbartlett

Post Reply
mark steinmann
Posts: 8
Joined: Tue May 23, 2006 9:17 pm

FT-7100 need help

Post by mark steinmann »

I have an FT-7100 that is impossible to program i would like to clear it factory default and start over. can any one tell me how? thanks mark
k3td
Posts: 5
Joined: Mon Dec 27, 2004 3:14 pm
Location: Wake Forest, NC

Post by k3td »

1) Turn the radio off
2) Press and HOLD the (V/M), (MHz) and (REV) keys while turning the radio on.

This resets the CPU, all memories and menu settings to factory defaults.

Good luck and 73,
k3td
Posts: 5
Joined: Mon Dec 27, 2004 3:14 pm
Location: Wake Forest, NC

Post by k3td »

1) Turn the radio off
2) Press and HOLD the (V/M), (MHz) and (REV) keys while turning the radio on.

This resets the CPU, all memories and menu settings to factory defaults.

By the way, I have heard that late model 7100s did not have the problems that plagued the earlier units. Can anyone confirm if this is true? If so, what is the serial number series of the "good" ones?

Good luck and 73,
Post Reply