TK630H part number?

Bob · Post by **Bob** » Fri Jun 02, 2006 7:55 pm

Anyone have the part number for the TK630H? Just bought a 630, but it was missing the main power cable.

Bob · Post by **Bob** » Mon Jun 05, 2006 1:22 pm

Anyone? Is it the same cable as the 730H and 830H?

ka7wnf · Post by **ka7wnf** » Mon Jun 05, 2006 4:28 pm

I don't know the number but there is a work around if you can't find one. My 630H had the connector removed and new wires were connected right to the board. They are screwed on so it's an easy mod. I use an Anderson Powerpole connector on the wires.

n5tbu · Post by **n5tbu** » Mon Jun 05, 2006 4:58 pm

The Kenwood ham hf rig powercords are the same such as a Ts 440,call HRO or AES and ask them.
mod

Meatball · Post by **Meatball** » Tue Jun 06, 2006 9:53 pm

It is the same power cable as the TK-730H/830H.

n5tbu · Post by **n5tbu** » Tue Jun 06, 2006 9:58 pm

Yes,it's been covered ,all the 30 H radios use the same powercord as the Kenwood 100 watt HF rigs,the 30 series lowpower(no H in the model)use a cheap cable from Kendoo.com.
mod

JA1 · Post by **JA1** » Wed Jun 14, 2006 7:44 pm

for tk 630-h part number kct-17 remote mount/ dash mount. kct-15. for low power [dash kct-14] for high power dash kct-15. all kenwood part number's. hope this help's.

The Radio Information Board

TK630H part number?

TK630H part number?

cable

KENWOOD CABLE 630-H