kenwood krk-4db programming

[deltamedicseo]

I have installed a krk-4db kit onto a tk-630H and a tk-830. The tk-630 is radio 1 and the tk-830 is radio 2. I have installed all the hardware sent in the krk-4db box including the FAB and FAC chips into the IC108. However when I power up the radios the tk-830 does not seem to be turning on, I`m not hearing the relays click. And also when I try to read the radios to program my software is only seeing the tk-630H.
Am I missing or forgetting something else? Any help would be greatly appreciated.
Thanks

[Andy Brinkley]

There are several jumpers that have to be re configured in the radios, have you done them?

[deltamedicseo]

No I don`t. Do you know which ones need to be configured? Thanks for the reply. Sean

[Andy Brinkley]

I'll see if I can lay my hands on the KRK-4DB instruction manual and let you know.

[ka7wnf]

I have a copy of the manual if you need it.

[deltamedicseo]

Thanks Andy. I appreciate your help

[n5tbu]

Also,you need to select dual band in your software.
mod