Page 3 of 14
Re: MODEL STRING DECODE REQUESTS ONLY
Posted: Thu Sep 18, 2008 3:35 pm
by Intrinsically Safe
parker4782 wrote:242-5477-201DBBB4
53SL
7/800MHz
Dash Mount
P25 Conv
No Encryption
6 button Control Head
Data Cable
P25Trunk/SmartZone/SmartNet
P25 Mobile Data
No OTAR
Series 4
Still supported be EFJ.
Re: MODEL STRING DECODE REQUESTS ONLY
Posted: Wed Oct 29, 2008 11:18 pm
by rlg0503
Attempting to decode the following. Your assistance is greatly appreciated.
242-5183-810-GB2
If possible, please include what software would be needed to program this radio. Again, thanks in advance!
Re: MODEL STRING DECODE REQUESTS ONLY
Posted: Thu Oct 30, 2008 9:20 am
by Intrinsically Safe
rlg0503 wrote:242-5183-810-GB2
5100 (not SL/Ascend)
800 MHz Only
Non-IS Model II
Non-IS battery
Black Housing
Analog/P25 Conv
SmartNet
SmartZone
Star (Omnilink)
Digital SN/SZ
512 TG
This radio is no longer supported by EFJ
As far as programming SW, it depends on what firmware is in the radio.
The latest firmware for this radio is 2.8.15 which would require PCC 1.28.0.8
I.S.
Re: MODEL STRING DECODE REQUESTS ONLY
Posted: Thu Nov 13, 2008 3:29 pm
by motohead
Can you decode this for option set:
242-5143-888
Thanks,
Motohead
Re: MODEL STRING DECODE REQUESTS ONLY
Posted: Fri Nov 14, 2008 5:24 pm
by motohead
What migh be the feature set for 242-5276-860-SL4
Re: MODEL STRING DECODE REQUESTS ONLY
Posted: Sat Nov 15, 2008 1:26 pm
by Intrinsically Safe
motohead wrote:Can you decode this for option set:
242-5143-888
Thanks,
Motohead
5100 (not SL/Ascend)
450-512MHz
model II non-IS
-888 are consignment radios. Typically they will have most options turned on, since they are for custoemrs to demo. But I cannot say for sure which options are or aren't enabled.
Re: MODEL STRING DECODE REQUESTS ONLY
Posted: Sat Nov 15, 2008 1:29 pm
by Intrinsically Safe
motohead wrote:What migh be the feature set for 242-5276-860-SL4
Analog/Digital Conv
Smartnet/Smartzone
Star (Omnilink)
Digital Sn/SZ
512 TG
MDC-1200
Single Key DES/DES-OFB
Re: MODEL STRING DECODE REQUESTS ONLY
Posted: Sat Dec 27, 2008 10:08 am
by n3obl
I figured this is a 1st gen vhf but what options?
242-5113-310-GF
Frank
Re: MODEL STRING DECODE REQUESTS ONLY
Posted: Tue Dec 30, 2008 2:02 pm
by Intrinsically Safe
242-5113-310-GF
5100 (not SL/Ascend)
VHF
Non-IS, Model III
162-174 Antenna
Non-IS Battery
Black housing
Ana/Dig Conv
SmartNet
SmartZone
Star(Omni-link)
Digital SN/SZ
512 TG
Re: MODEL STRING DECODE REQUESTS ONLY
Posted: Fri Jan 09, 2009 3:48 pm
by QuarterWave
How about a 023-5170-063 ??
Thanks I S!!
Re: MODEL STRING DECODE REQUESTS ONLY
Posted: Fri Jan 09, 2009 4:33 pm
by Intrinsically Safe
All I can really tell you is that it is a 5100 (not SL/Ascend) and 7/800 MHz.
Re: MODEL STRING DECODE REQUESTS ONLY
Posted: Mon Jan 12, 2009 5:15 pm
by JETorres
What about:
51SL
242-5216-660SL4
V 4.4.4
Also, what PCC version do I need?
Thanks so much!
Re: MODEL STRING DECODE REQUESTS ONLY
Posted: Mon Jan 12, 2009 10:30 pm
by TonyAcabono
242-5112-610-G02
Thanks in advance
Re: MODEL STRING DECODE REQUESTS ONLY
Posted: Tue Jan 13, 2009 12:25 pm
by Intrinsically Safe
51SL
242-5216-660SL4
V 4.4.4
5100SL
VHF
IS Model II
VHF Wideband Antenna (146-174)
IS Battery
Black Housing
Analog/P25 Conventional
SmartNet
SmartZone
STAR (OmniLink)
Digtial SN/SZ
Single Key P25 DES/DES-OFB
512 TG
MDC1200
Also, what PCC version do I need?
For 4.4.4 you will need PCC 1.28.08
I would recommend upgrading to the latest 4.14.5 which would use PCC 2.10.2
I.S.
Re: MODEL STRING DECODE REQUESTS ONLY
Posted: Tue Jan 13, 2009 12:30 pm
by Intrinsically Safe
242-5112-610-G02
5100 NOT SL/Ascend
VHF
NON IS Model II
VHF Wideband Antenna (136-174)
Non IS Battery
Black Housing
Analog/P25 Conventional
P25 Trunking
SmartNet
SmartZone
Star (Omnilink)
Digital SN/SZ
P25 DES-OFB
AES
Conv OTAR
P25 Trunking OTAR
512 Channels
This is a series 2 legacy radio that is no longer supported by EFJ
I.S.