Anybody know if the FCN, PRI, ENT and CLR buttons on the BK DTMF keypads can be used for A, B, C and D functions too?
Reason for asking is because im trying to program an RC-1000 repeater controller and it takes the A, B, C and D buttons to get it into programming mode. We dont have any of the 16 digit type in order to program.
We are using the BK LPH radios for the TX and RX repeater itself and our field radios are all BK's too.
Thanks
BK DTMF keypad question
Moderator: mancow
-
ai4ui
- Posts: 17
- Joined: Tue May 22, 2007 7:51 am
- Location: Hung by the neck with a rope until I was dead, dead, dead...
Re: BK DTMF keypad question
Don't know if you found your answer...
On both the EPH & DPH CMD that I have the A, B, C, & D is as you ask.
Robert
On both the EPH & DPH CMD that I have the A, B, C, & D is as you ask.
Robert
-
firechief40
- Posts: 8
- Joined: Thu Dec 23, 2004 11:05 pm
Re: BK DTMF keypad question
Hi Robert, didnt find my answer but i believe you just answered it. Thanks so much! 