Page 1 of 1

Kenwood 3140 Low Battery Alert

Posted: Wed Oct 28, 2009 7:39 pm
by 545
A friend of mine dropped his 3140 handheld the other day, and now no matter what fully charged battery we put on his radio, the low battery alert activates and then resets the radio like you are turning it on. Has this happened to anybody else, or does anybody have any ideas before I start taking it apart? My first thought is to reprogram the radio to see if that works, but that seems too simple. Thanks in advance!

Re: Kenwood 3140 Low Battery Alert

Posted: Thu Nov 05, 2009 12:10 am
by n7maq
545 wrote:A friend of mine dropped his 3140 handheld the other day, and now no matter what fully charged battery we put on his radio, the low battery alert activates and then resets the radio like you are turning it on. Has this happened to anybody else, or does anybody have any ideas before I start taking it apart? My first thought is to reprogram the radio to see if that works, but that seems too simple. Thanks in advance!

There was a service bulletin out about this. On the older units there is a small resistor that gets damaged by the LCD holder and it will need replaced. It is a surface mount resistor, so be sure who ever repairs it has the correct soldering skills, tools and access to the service bulletin. The sb shows how to modify the LCD holder so it does not happen again.

If he needs help getting it fixed locally drop me a PM or mail to n7maq at yahoo, I have done several of those repairs.

Jim

Re: Kenwood 3140 Low Battery Alert

Posted: Thu Nov 05, 2009 8:48 am
by 545
Thanks for the info Jim. I'll pass on your info to him. If he decides to repair it, I'll send you an email.

Re: Kenwood 3140 Low Battery Alert

Posted: Sun Nov 08, 2009 8:25 pm
by 545
PM sent to you Jim.