I've been looking for a couple weeks now, but can't seem to find anything on setting up 'Fall-back In cabinet Repeat' for a GE/MA-COM Mastr 3 repeater;
I know I've done it before, but it is eluding me right now;
Basically,what I'm looking for is: When a Mastr3 is set up for Voting Tone output to the RX audio pair, to a comparator/voter, and if it unsquelches, there is a timer, that if the station doesn't get a keying sequence back from the comparator within a certain window, (maybe 50 ms?), it automatically does an in-cabinet repeat.
Moto calls is "Fall-back In Cabinet Repeat", I think I remember GE just calling it In-cabinet Repeat. Name doesn't really matter.
Any clues out here?
In-cabinet repeat, Mastr 3
-
- Posts: 8
- Joined: Mon Jul 04, 2005 1:55 am
- Location: Idaho
Re: In-cabinet repeat, Mastr 3
Did you ever find notes on this? I'm in need of the info as well. I believe that it had to do with configuration of the PTT priorities and such.
-
- Posts: 1
- Joined: Thu Feb 12, 2009 10:21 pm
Re: In-cabinet repeat, Mastr 3
Yes, I found it. Now, for the life of me, I can't remember how I got to it; I think it had something to do when you go into 'Remote' tab, and select the voting tone, etc, etc.
Re: In-cabinet repeat, Mastr 3
looking for this info or any info on making a MIII repeat in the cabinet. I toggle thru the repeater tab in options and only get none or back-to-back repeat options ?
can ya hear me now...
Re: In-cabinet repeat, Mastr 3
Finally found it!
Accessible in MASTRUTL program, under Programmable Timers, named "Repeat Delay" and mine defaulted to value of 20. (1= 10ms, so 20 = 200ms.)
Help screen:
"Repeat Delay: Delay between the time RUS is detected and the audio is repeated. This delay is used mostly in voting systems to give the voter time to do a remote PTT.
This field will only work if Repeat Delay is enabled. Repeat Delay is usually only enabled in Simulcast and voting systems
etc. etc."
Accessible in MASTRUTL program, under Programmable Timers, named "Repeat Delay" and mine defaulted to value of 20. (1= 10ms, so 20 = 200ms.)
Help screen:
"Repeat Delay: Delay between the time RUS is detected and the audio is repeated. This delay is used mostly in voting systems to give the voter time to do a remote PTT.
This field will only work if Repeat Delay is enabled. Repeat Delay is usually only enabled in Simulcast and voting systems
etc. etc."