TK-780H-1 refuses to display Fleetsync info
Posted: Thu Jul 04, 2013 5:56 am
Hi all, hopefully someone can suggest what I've missed.
I'm having trouble getting a recently purchased TK-780H-1 to display any received FleetSync ID info even just the number refuses to show up on the radio display.
It does send it's own ID without issue as my 7160 & 7360 can display the info from the 780 correctly as well as each others ID info.
I am using KPG-49D Ver 4.02 to program the 780.
The Kenwood Logo above the power switch is Orange so I believe it is ver 2 radio.
I have the following settings for FleetSync:
Optional Features 1 > Display Character = Channel Name
Optional Features 1 > Signalling = OR
Optional Features 1 > Off Hook Decode is selected
Optional Features 2 > PTT ID Type = FleetSync
Optional Features 2 > PTT ID = EOT
FleetSync > Fleet(Own) = 100
FleetSync > ID(Own) = 1100
FleetSync > Unit ID Encode Block is blank
FleetSync > FleetSync Baud Rate (bps) = 1200
FleetSync > Message Mode Timer (sec) = 300
FleetSync > Emergency Status Response = None
FleetSync > Manual Dial is selected
FleetSync > Inter-fleet Call is selected
FleetSync > PTT ID Side Tone is Selected
FleetSync > Caller ID Stack is selected
FleetSync > Caller ID Display is selected
Not sure what else I can include to be helpful.
Any suggestions on what I may have missed greatly appreciated.
Thanks in advance.
I'm having trouble getting a recently purchased TK-780H-1 to display any received FleetSync ID info even just the number refuses to show up on the radio display.
It does send it's own ID without issue as my 7160 & 7360 can display the info from the 780 correctly as well as each others ID info.
I am using KPG-49D Ver 4.02 to program the 780.
The Kenwood Logo above the power switch is Orange so I believe it is ver 2 radio.
I have the following settings for FleetSync:
Optional Features 1 > Display Character = Channel Name
Optional Features 1 > Signalling = OR
Optional Features 1 > Off Hook Decode is selected
Optional Features 2 > PTT ID Type = FleetSync
Optional Features 2 > PTT ID = EOT
FleetSync > Fleet(Own) = 100
FleetSync > ID(Own) = 1100
FleetSync > Unit ID Encode Block is blank
FleetSync > FleetSync Baud Rate (bps) = 1200
FleetSync > Message Mode Timer (sec) = 300
FleetSync > Emergency Status Response = None
FleetSync > Manual Dial is selected
FleetSync > Inter-fleet Call is selected
FleetSync > PTT ID Side Tone is Selected
FleetSync > Caller ID Stack is selected
FleetSync > Caller ID Display is selected
Not sure what else I can include to be helpful.
Any suggestions on what I may have missed greatly appreciated.
Thanks in advance.