Thales 25 Remote Commands?
Posted: Sat Feb 03, 2024 3:40 am
I wrote some software using two of the 40 Thales 25 Remote commands (That I know of) so I could fine tune the Radio's transmit (and recv) frequemcy while dialing the many power setting so as not to set aflame my frequency counter. I know of a command that reloads the hardware calibration. I am thinking that I'm simply not aware of the commands (Other then /XT that shifts the reference oscillator table. Maybe they were never made public or are some obscure post someone made 14 years ago. AT some point commands were used to tweak the receiver but was that ever public (Probably part of some inside program they used when building the radios. On the off change anyone does know any other commands that alter the hardware calibration table? It would be most appreciated. And No - I'm not asking for any Thales software I know that is not kosher.
I'm really having fun with these radios after reverse engineering the communications between the radio and a working original Thales LitIon battery and even more so since I'm using 3 5,000mAh 21700 batteries.
I'm really having fun with these radios after reverse engineering the communications between the radio and a working original Thales LitIon battery and even more so since I'm using 3 5,000mAh 21700 batteries.