The Radio Information Board

Hi, I've got a Regency RM Series Mobile Transceiver Programming
manual
&
One Each RMP1 Programming module.

This plug inside the transceivers, and allows on-board programming
of the radio.

The Internal programming module will allow programming of the RML60
A or B (Low Band Radio), RMV60B (VHF)and RMU45NB (UHF) and other
Regency type radios. Open the cover on the radio. Inside, toward the
Left rear of the radio, you will see a 4 pin port. That is where the
module goes. This will allow you to program your mobile radio
through the Keypad.

FREE SHIPPING VIA UPS BLUE LABEL 2nd Day shipping
http://cgi.ebay.com/ws/eBayISAPI.dll?Vi ... y=296&rd=1

Ebay item number; 3065358918
Auction title;
Relm Regency RM Radio Programmer Programming

user id; mercer_54b
I also have one up for Auction
These are going fast.... Once programming is complete, you can
remove the programming module, close the cover on the radio. This
Programming Module can be used over and over. Is just placed into
radio for programming. Hope this answers some questions.